Automobile Engineering proects - Automobile Engineering Projects for Final Year Students - Project Topics or Ideas -Automobile Engineering Project Topics For Third/Final Year B.E-BTech

1. Over speed indication and Automatic accident Avoiding System for four wheeler
2. Fabrication of turbo super charger for two wheeler
3. An intelligent mobile robot navigation technique using RFID
   Technology (IEEE 2008)
4. Fabrication of Automatic hand break Release
5. Automatic pneumatic bumper for four wheeler
6. Fabrication of Foldable Electric Go Bed Drive
7. Shock Absorber Test rig using Cam and sensors
8. The development of intelligent home security robot (IEEE 2005)
9. Automatic temperature controller with cooling system for car
10. Fabrication of four wheel steering system
11. SMS Based automatic vehicle accident information system
12. Over speed indication and Automatic accident Avoiding System for four wheeler
13. Hydraulic hybrid system for four wheeler
14. Efficiency Increasing System in Automobile by using preheating method
15. A robot system for fire fighting in tunnels (IEEE 2005)
16. Remote controlled material handling equipment
17. Electronic Fuel Injection (EFI) system for Two wheeler
18. Fabrication of Automatic Electro-Hydraulic Jack for Four Wheeler
19. Automatic reserve indication system
20. D & F of Triangular air Compressor with Common Compression Chamber
21. Button operated electro-magnetic gear shifting system for two wheeler

---------------------------------------------------

1. SMS based automatic two wheeler locking system
2. Fabrication of queries controlling system for two wheeler
3. Fabrication of man less defense
4. GPS based vehicle root tracking system
5. Fabrication of Two Engine Synchronization for Four Wheeler
6. Design and development of voice / Tele operated intelligent mobile robot (IEEE 1997) Fabrication of Automatic head lamp alignment system with Dim/Bright Controller
7. Automatic sensor based wall painting robot

--------------------------------------------------

1. Remote controlled scrap collecting vehicle
2. GPS based automatic vehicle accident information system
3. Automatic Differential Unit locking system for Automobile
4. Remote controlled tilting handicapped wheel chair
5. Electronic assisted hydraulic braking system
6. Smart shock absorber for automobile
7. SMS based vehicle Ignition controlling system
8. Fabrication of Adaptive breaking system
9. Electrical Power Generation system using Railway track
10. Fabrication of Automatic Vehicle Over speed controlling system for School Zone

---------------------------------------------------

1. GSM based two wheeler security system
2. Fabrication of three axis pneumatic modern trailer
3. Automatic Break Failure indicator and Engine Over Heating Alarm
4. Two Wheeler Automation with security System
5. Combined hydraulic and disk break
6. Vehicle Accident identifier with SMS informer
7. Compressed air production using vehicle suspensor
8. Remote controlled air craft (Flying Model)
9. Automatic Pneumatic welding Robot
10. Intelligent Active Suspension system for two wheeler
11. Remote operated weapon system
12. Fabrication of Sub-Marine (Model)
13. Automatic Scrap collecting Vehicle
14. Fabrication of Gear Level Indicator for Automobile
15. Automatic Vehicle Over speed Controlling System
16. Fabrication turbo charger for two wheeler
17. Video analyzing remote controlled vacuum cleaner
18. Fabrication of Electro-Magnetic braking System For Automobile
19. Fabrication of Go Ped Drive
20. Fabrication of Foldable two wheeler
21. Intelligent Braking System in Four Wheeler (IBS)
22. Emergency Braking System in Four Wheeler (EBS)
23. Anti-Lock Braking System In Four wheeler (ABS)
24. Artificial Intelligent based Solar Vehicle
25. Fabrication of Automatic pneumatic jack
26. Automatic Distance Measurement and Braking System By using Ultrasonic Waves

---------------------------------------------------

1. Fabrication of Automatic steering control system for automobile
2. Fabrication of Multi-Engine compressor
3. Computer controlled wireless robot with wireless Camera
4. Fabrication of Solar Race Car
5. Fabrication of Multi Nut (Wheel) Tightner

1. Electro-Hydraulic System for Automation in Four Wheeler
2. Automated Guided Vehicle (AGV)
3. Automatic material handling Fire Fighting Robot
4. Aero plane Controlling System (Flying Model)
5. Fabrication of Hydraulic Break show riveting Machine
6. Automatic Vehicle Accident prevention system
7. Digital locking (Fuel, ignition, side lock) system (Password) for Two wheeler

---------------------------------------------------

1. Efficiency increasing system in automobile
2. Robot Controlled Vacuum Cleaner
3. Digital locking system for material handling vehicle
4. Fabrication of hydraulic screw jack
5. Intelligent Way Searching Pick and Place Robot
6. Automatic paint spraying pick and place Equipment
7. Fabrication of Path finding Vehicle
8. Automatic Electro-magnetic Clutch
9. Cell phone controlled pick and place robot
10. Remote controlled Pick and Place video analyzing robot
11. Fabrication of Fuel Injector testing equipment
12. Fabrication of Catelite converter for Automobile
13. Fabrication of Solar Hybrid Car
14. Fabrication of Fully Automated Intelligent Vehicle (Car Model)
15. Fabrication of Hybrid Vehicle
16. Sand Collecting Vehicle
17. Fabrication of Kids Car
18. Fabrication of Lube oil cooler
19. Automatic pneumatic vulcanizing Machine
20. Fabrication of Wind Energy Vehicle
21. Fabrication of Intelligent Motorized Hydraulic Jack
22. SMS controlled moving vehicle for industrial application
23. Voice Controlled Material handling vehicle
24. Cell phone controlled Solar Vehicle
25. Fabrication of Gas kit for two Wheeler
26. Fabrication of Electro-Hydraulic Braking system for Four Wheeler
27. Fabrication of Gas kit circuit board for two and Four Wheeler
28. Auto clutch for Automobile
29. Fabrication of Hydraulic Cylinder Liner Puller
30. Remote Controlled Solar Vehicle
31. Automatic Visitor Guided with material handling Vehicle
32. High Speed Indication and automatic Pneumatic Braking System
33. Automatic Railways Signaling System
34. Fabrication of Unaided Guided Vehicle(UGV)
35. 112. Highways High Speed Sensing and Automatic Speed Braking System
36. 113. Fabrication of Path Finding Robot
37. Sensor Operated Automatic Reverse Braking System
38. Automatic Track Guided Vehicle (ATGV)
39. Fabrication of PC based pick and place sequence robot
40. Fabrication of Automatic Railway Gate Controller
41. Digital Fuel Level Indicator
42. Fabrication of Car Automation
43. Automatic Vehicle Speed measuring using IR Rays
44. AI Based Fire fighting AGV
45. PC based pick and place jumping robot
46. Automatic Rain operated wiper and Head light Dim/Bright Controller 124. Fabrication of Gas kit for Four Wheeler
47. Fabrication of Two Wheeler Automation with Security System
48. Fabrication of Electrical Steering Mechanism
49. Fabrication of Vulcanizing machine
50. Fabrication of Battery Car
51. Fabrication of Sensor Operated AGV
52. Cordless security System for Cars
53. Sensor Operated Track Guided Vehicle
54. Fabrication of Motorized Hydraulic Jack
55. Fabrication of Motorized Screw Jack
56. Fabrication of Emission control of Diesel Engine
57. Fabrication of oil pump and water pump for jeep and tractor
58. Pick and Place jumping robot with remote control
59. PC Based wireless material handling vehicle
60. Fabrication of Solar Powered Automobile Air Cooler
61. AI Based Path Finding Vehicle
62. Fabrication of Road curve finder
63. Fabrication of Electric Two Wheeler
64. Automatic head light dim and bright controller with engine
65. overheating alarm
66. Automatic Vehicle Accident Information System
67. Automatic steering control Mechanism using sensor
68. Automatic Rain Operated Wiper
69. PC based cordless pick and place Jumping Robot
70. Fabrication of Automatic car overtaking system
71. Cell Phone Controlled pick and place Robot
72. Railways accident Avoiding System – (Level crossing and Fire
73. Alarm)
74. Fabrication of Automatic Magnetic Accident preventer for Train 151. Fabrication of Electronic ignition system
75. Quick lifting jack with Gear Arrangement
76. Cell Phone Controlled jumping Robot
77. Automatic sky Car Parking System
78. PC based wireless Pick and Place Robot
79. Artificial Intelligent Based Automatic Path finding Cum Video Analyzing vehicle
80. 

Electrical engineering Projects - Latest electrical project ideas for engineering students -Electrical Engineering (EEE) Projects for Final Year Students

2. Mobile technology (GSM) based remote monitoring and control of digital Energy meter. Useful for Electricity Department personal for remote meter reading. Also useful to disconnect the power supply to consumer in case of non-payment of electric bill. This is also used to exchange messages like power cut timings with the consumers.
3. Controlling AC lamp Dimmer through Mobile Phone (IEEE-2010).
4. Multiple Transformers oil temperature monitoring with automatic circuit breaker operation with SMS based alerts.
5. A Novel Wireless Self-powered Microcontroller-based Monitoring Circuit for Photovoltaic Panels in Grid-connected Systems (IEEE-2010).
6. Wireless Energy Meter reading on hand-help device based on RF Transceiver.
7. SCADA implementation based on wireless RF technology. (IEEE-2009).
8. Method of Measuring Power Quality and Development of Monitor Device (IEEE-2010).
9. Motor speed monitoring and control system using GSM modem.
10. A Smart Card Based Prepaid Electricity System.
11. High voltage fuse blown indicator with Voice based announcement system.
12. Voice enabled devices switching for visually impaired.
13. Industrial/power grid electrical parameter Data Acquisition system through wireless technology.
14. DC Motors speed synchronization for rolling mills.
15. Touch Screen based digital devices control system. This project is to build a Graphical LCD Touch Screen interface for switching electrical devices. The controlled devices can be of high voltage or low voltage.
16. Construction of central control unit for Irrigation water pumps.  Cost effective method to control entire villagers water pumps with user level authentication. Illiterates friendly system.
17. Wireless Energy Meter monitoring system with automatic tariff calculation.
18. Home Network Configuring Scheme for All Electric Appliances Using ZigBee-based Integrated Remote Controller.
19. Resistive Touch screen controlled contact less speed monitoring and controlling of dc motor with speed limit alerts.
20. DC Motor Speed and direction control over GSM Mobile/Modem.
21. Smart Wireless Temperature Data Logger (IEEE-2007)
22. Energy meter monitoring and control system using SMS technology(IEEE-2007).
23. Energy meter data logging system with Realtime clock and KWH readings. Very useful for historical data logging and analysis.
24. Energy meter per-day average, Max and Min Load display on Graphical LCD.
25. MMC/SD card based data logger for energy meter with time and KWH readings for historical data logging and analysis.
26. PIR based energy conservation system for corporate Computers and lighting system.
27. Development of Zigbee based Street Light (IEEE-2008)
28. Wireless power theft monitoring system and indication at local substations.
29. Touchscreen controlled lamp dimmer for next generation apartments.
30. Wireless electrical devices monitoring and controlling system for industrial applications.
31. Microconroller and Touchscreen controlled motor speed and direction controlling system.
32. Touchscreen operated industrial oil dispensing system (OIL SCADA).
33. An On-line Monitoring System of Temperature of Conductors and Fittings Based on GSM SMS and Zigbee(IEEE-2008).
34. 4-wired resistive touch screen controlled lamp dimmer for next generation apartments with Optical isolation and zero crossing detectors. 
35. Dual (active and standby) Lithium-ion battery charger for continuous non-interrupted power supply to critical loads.
36. Graphical LCD and Touch Screen based Electrical devices control system.
37. Implementation of wireless sensors network based industrial temperature monitoring system.
38. Touchscreen based advanced temperature monitoring and control system with graphical LCD.
39. GSM based Irrigation Water Pump Controller for Illiterates (No Mobile phone operation knowledge required).
40. Triac and optically isolated diac based electrical oven temperature monitoring and controlling system with zero-crossing detector.
41. High power LED based intelligent streetlight controlling system with automatic brightness control with vehicle presence sensor (GSM optional).
42. Timer based Electrical Oven temperature monitoring and control for Metal Industries.
43. GSM based SCADA implementation using Microcontroller.
44. 3-phase irrigation water pump controller for illiterates using dual GSM Modems.
45. Microcontroller based Substation Monitoring and control.
46. Microcontroller based Generator/Alternator Control and Monitoring System
47. Electrical Data (voltage, current, frequency etc...) Logger. The purpose of this project is to log electrical data at remote locations like substations. The data is sensed using various electrical sensors and processed by microcontroller. This processed data is stored in a MMC memory stick connected to the microcontroller board. This data can be downloaded to computer for further processing.
48. Hall Effect sensor based non-contact Tachometer for electrical motors speed measurement.
49. Microcontroller based Single phasing preventor.
50. IR Remote controlled Irrigation water pump controller with single phasing protection.
51. Microcontroller based Solar Tracker with Stepper Motor Control.
52. Auto-Credit Energy Metering System using mifare card.
53. PWM based DC Motor Closed loop Speed Controller.
54. RS485 based SCADA system for longer distance powered devices
55. Radio Frequency (RF) based Wireless Control Of DC/Stepper Motor Speed Control.
56. RF based Wireless Electrical Devices Controller.
57. Motor Speed Monitoring over GSM Mobile.
58. Microcontroller based refrigeration control system.
59. Timer based automatic power cutoff for industrial sealing/packaging machines.
60. Wireless SCADA.
61. GSM/Mobile/Cell Phone Based Device Monitoring and Control.
62. GSM Based Automatic Irrigation Water Controller System
63. Automatic Intelligent Plant Watering System
64. IR (Infrared) Remote based Stepper Motor Speed and Direction Controller
65. RC5 IR Based Remote Device Switching
66. The Robot that follows the (Infrared) Light
67. Frequency Locked Loop DC Motor speed monitoring and control system.
68. Digital Tachometer (Non-contact)
69. Digital Voltage, Current and Frequency Meter.
70. SCADA system design and construction for real-time electrical parameter monitoring and control.
71. Transformer oil temperature monitoring with automatic Circuit Breaker operation.
72. GSM/Mobile/Cell Phone Based Device Monitoring and Control System.
73. Energy Tapping Identifier Through Wireless Data Acquisition System. 
74. Substation Fuse blown Indicator.
75. Mobile phone controlled Street Light monitoring and control system.
76. UPS battery monitoring system over GSM for high availability systems (banking/finance/medical etc).
77. DTMF mobile phone controlled dam water gates controlling system with high-level protection.
78. DC Motor Speed and direction control using RF/IR/Zigbee technologies.
79. Hazardous chemical valve control system with stepper motor and line of site remote control.
80. Contact less Motor speed monitoring on Graphical display with high and low speed alerts.
81. Design and construction of Earth fault relay for single phase power system.
82. RF transceiver (Zigbee/X-Bee) based energy meter monitoring system. (Energy Meter reading on PC over wireless comm.)
83. Talking energy (KWH) meter.
84. Sine wave Inverter.
85. Transformerless Variable Frequency Drive
86. Solar operated Liquid Vending machine
87. DC-DC Converter
88. Green wind energy for rural electrification
89. AC-AC Converter
90. Earth Fault relay for 3-phase power system
91. Programmable current relay for high speed protection.
92. MPPT Optimal Power Point Tracking system for Solar PV panels.
93. Password enabled pre-paid liquid/milk dispensing system.
94. High voltage fuse blown indicator with display on PC with optical isolation between PC and HV bus bars
95. Solar based air compressor pump for car bike tire inflate
96. Voice operated Intelligent Fire extinguisher vehicle
97. An On-line Monitoring System of Transmission Line Conductor De-icing(IEEE-2008).
    Designing of Haptic Keypad with Magnetic Door Lock system.
    
    ansari

industrial production engineering projects

1. Project title

2.  APPLICATIONS AND TECHNO-ECONONICS OF NUMERICALLY CONTROLLED MACHINE

3. DESIGN AND INSTALLATION OF AN EXPERIMENTAL SOLAR POND

4. STUDY ON UNCERTANITY OF MEASURMENT IN METROLOGY LABARATORY

5. MATERIAL HANDLING SYSTEMS ANALYSIS AND DESIGN

6. PRODUCTIVITY INCREASE BY OPTIMUM UTILISATION OF MACHINERY, MANPOWER AND ENERGY IN A PAPERBOARD INDUSTRY

7. OPTIMIZATION OF MATERIALS UTILISATION

8. EFFICENT ALLOCATION OF BUSES TO DEPOTS USING MATHEMATICAL PROGRAMING FOR BANGALORE TRANSPORT SERVICE

9. VALUE ENGINEERING ON MONOBLOC CENTRIFUGAL PUMPS AT BEST AND CROMPTON ENGINEERING LIMITED

10. SOLAR ASSISTED VEHICLE FOR THE HANDICAPPED

11. A SURVEY ON QUALITY PROBLEMS IN SMALL SCALE INDUSTRIES

12. A COMPUTERISED AND PRACTICAL ALGORITHM FOR LARGE SCALE VEHICAL ROUTING ITI - A CASE STUDY

13. COMPUTER AIDED DESIGN NESTING OF SHEET METAL

14. SURVEY OF INDUSTRIES

15.  INTER FEROMETRY

16. LIBRARY PACKAGE

17. INVENTORY CONTROL SOFTWARE

18. MATHEMATICAL MODEL FOR DRILLING PROCESS

19. DESIGN AND FABRICATION OF ROTARY INDEXING MULTITOOL POST

20.SEED PELLTING GADGET

21. COMPUTER SOLUTIONS FOR NESTING

22. COMPUTER AIDED LIBRARY MANAGEMENT

23. STUDENTS INFORMATION PACKAGE IN DBASE 4

24. SELECTION OF MILLING CUTTERS AND CONTOUR CUTTING

25. OPTIMIZATION IN ROUTE DESIGINING

26.PEDAL OPERATED CLAY MIXER FOR MAKING CERAMIC TILES AND BRICKS

27. COMPARATIVE STUDIES OF KANDASRI SUGAR MILL WITH LARGE SCALE SUGAR MILL AND ITS FEASABILITY

28. COMPUTER AIDED DESIGN OF SCREW JACK

29. JUST IN TIME MANUFACTURE

30. DEVELOPMENT MATHEMATICAL MODEL FOR GRINDING WHEEL WEAR OF A FLOUR MILL

31. CORRUGATED SHEET ROLLING MACHINE

32. COMPUTER AIDED LAYOUT OF CONTROL PANEL FOR THE HYDRAULIC POWER PACK

33. DESIGN AND FABRICATION OF SPIRAL BINDING MACHINE

34. STRACH EXTRACTION FROM POTATO " POTATO PULPER"

35. FOOT OPERATED SAND SIEVING MACHINE

36. PRODUCTIVITY IMPROVEMENT IN SMALL SCALE INDUSTRIES

37. DESIGN AND FABRICATION OF SELF CENTERING TABLE VICE FOR DRILLING MACHINE

38. SPHERICAL GROOVE CUTTING ATTACHMENT

39. COMPUTER AIDED PROCESS PLANNING (CADD) SYSTEM FOR A GENERAL MACHINE SHOP

40. LEG OPERATED FILING MACHINE

41. FINANCIAL INFORMATION SYSTEM FOR COLLEGE OFFICE AUTOMATION

42. COMPUTER AIDED PROCESS PLANNING FOR MILLING JOBS

43. DESIGN AND FABRICATION OF SUCTION TYPE GRAINS CLEANING MACHINE

44. DESIGN, FABRICATION , FIELD TEST AND ANALYSIS OF ROPE AND WASHER PUMP

45. COMPUTER AIDED DESIGN AND DRAFTING OF HYDRAULIC POWER

46.WET FLOOR CLEANER  

47. MICROPROCESSOR CONTROLLED INDEXING ATTACHMENT

48. DESIGN AND FABRICATION OF PROGRESSIVE DIE

49. PRODUCT DESIGN OPTIMISATION USING TAGUCHI TECHNIQUES

50. COMPUTER AIDED PROCESS PLANNING (FOR HYDRAULIC PRESS)

51. DESIGN AND DEVELOPMENT OF NON-SLAM CHECK VALVE

52. AN EXPERT SYSTEM TO SUPPORT COMPUTER AIDED PROCESS PLANNING

53. OPTIMISATION OF SAND -CLAY-WATER SYSTEM FOR GREEN SAND MOULDING

54. CONTOUR GLASS CUTTING BY ABRASIVE JET METHOD

55. DESIGN AND FABRICATION OF LOW COST ROPE-WASHER PUMP

56. COMPUTER AIDED PROCES PLANNING

57. COMPUTER AIDED GENERATION OF CAM PROFILE

58.INTEGRATED COMPUTEISED MATERIALS PLANNING

59. KNOWLEDGE BASED INFORMATION SYSYTEM AND CAPP FOR GRINDING

60. DEVELOPMENT OF SOFTWARE PACKAGE FOR DESIGN OF EXPERIMENT

61. A SYSTEM FOR AUTOMATIC FEATURE EXTRACTION FOR CAD MODELS AND INTERACTIVE CAD DRAFTING

62. PNEUMATIC HACKSAW

63. DESIGN AND FABRICATION OF AN AUTOMATIC INDEXING UNIT

64. SAFETY INFORMATION AND MANAGEMENT SYSTEM

65.DESIGN AND FABRICATION OF MELTING POT FOR INDIRECT ARC FURNACE  

66. COMPUTER AIDED FEATURE EXTRACTION AND C N C PART PROGRAM GENERATION FOR ROTATIONAL PARTS

67. PRODUCTIVE DESIGN OPTIMIZATION OF A RELIEF VALVE USING TAGUCHI TECHIQUE

68. DESIGN AND FABRICATION OF GEAR CUTTING ATTACHMENT FOR LATHE

69. COMPUTERISED PLANT LAYOUT

70. HUMAN RESOURCES DEVELOPMENT IN SERVICE INDUSTRY

71. MULTI PRODUCT BATCH SHOP SEHUDULING

72. MODULAR DESIGN AND FABRICATION OF PRESS TOOL

73. APPLICATION OF TAUGCHI TECHNIQUE/ DESIGN OF EXPERIMENT TO HELMENT MANUFACTURING PROCESS

74. TOE LOAD MESURING DEVICE

75. DESIGN AND FABRICATION OF DRILL TOOL DYNAMOMETER

76. DESIGN AND FABRICATTION TESTING AND PERFORMANCE OF CENTRIFUGAL SEPARATOR FOR COOLANT RECOVERY SHIP WRINGER

77. STUDY OF RESEARCH AND DEVELOPMENT IN SMALL SCALE INDUSTRIES

78. UTILIZATION OF BASASE FLYSH AS A LOW COST ADSORBENT

79. DEVELOPMENT OF AN INFORMATION PACKAGE FOR UNORGANISED SMALL SCALE TEXTILE SECTORS

80. COMPUTER AIDED APPLICATION ENGINEERING FOR VERTICAL MACHINING CENTER-345

81. PORTABLE STIRRER

82. APPLICATION OF JUST-IN -TIME MANUFACTURE STRATEGY IN A SMALL SCALE INDUSTRY

83. PRODUCTIVITY IMPROVEMENT IN A MILK DAIRY( K.M.F)

84. SCHEDULING FOR MULTIPRODUCT FLOWLINE

85. SOLAR DESALINATOR

86. FABRICATION OF MOBILE LIFTING MACHINE

87. AIR POLLUTION COMMUTATION

88. PROFLE PROJECTOR

89. CA DISPLACEMENT PLOTTER

90. DESIGN AND FABRICATION OF SELF CENTERING TABLE VICE FOR DRILLING MACHINE

91. SOFTWARE FOR MINIMIZATION OF SCRAP

92. STUDY OF AERODYNAMIC ANALYSIS OF A VAN MODEL ON A TWO COMPONENT SUB-SONI WIND TUNNEL

93. FINITE ELEMENT MODELLING AND ANALYSIS OF THE HUMAN KNEE JOINT

94. MATERIAL REQUIREMENT PLANNING FOR SMALL SCALE INDUSTRIES

95. DEVELOPMENT OF COMPUTERISED INVENTORY MANAGEMENT SYSTEM FOR DISTRICT CIVIL HOSPITAL , BELGAUM

96. DESIGN AND DEVELOPMENT OF MATERIAL TESTING ACCESSORIES FOR 63T HYDRAULIC PRESS

97. COMPUTER ASSISTED PROCESS PLANNING FOR PRISMATIC PARTS ON VERTICAL MACHINING CENTER

98. AIR POLLUTION COMMUTATION

99. HYDRAULIC PALLET TRUCK

100.   PROGRAMMABLE AUTOMATIC WEGHING MACHINE

101. DESIGN AND FABRICATION OF DEEP SEA SIMULATOR

102. FABRICATION AND TESTING OF ABRASIVE JET MACHINE

103. DEVLOPMENT OF A MICRO CAR FOR THE PHYSICALLY CHALLENGED

104. COMPUTER AIDED DESIGN OF CUTTING TOOLS

105. OPTIMISATIO OF SURFACE ROUGHNESS MODEL FOR STEELS

106. SOFTWARE FOR DESIGNING THE OPTIMUM MACHINE TOOL GEAR BOX

107. SOFTWARE FOR SPINING MILL

108. INTERACTIVE CAPP SYSTEM FOR GENERAL MACHINE SHOP

109. REST PAUSE CYCLE USING ERGONOMICS

110. A SMART MECHATRONIC PRESSURE SENSOR

111. WEB DESIGN FOR DATA BASE ON STUDENT PROJECT WORKS USING ASP

112. PC BASED AUTO SWITHING AND CONTROL IN REAL TIME ENVIRONMENT

113. DESIGN AND FABRICATION OF POTOTO SORTING MACHINE

114. ENHANCMENT OF MACHINABILITY FOR EN SERIES STEELS USING MULTIPLE REGRESSION MEHTOD

115. COMPUTERIZATION OF PRODUCTION PLANNING AND CONTROL

116. REDUCTION OF CARBON MONOXIDE IN 2 STROKE PETROL ENGINE USING THERMAL REACTOR

117. AYURMACHINE

118. STUDIES ON WEAR CHARACTERISTICS OF GRAIN REFINED/MODIFIED HYPOEUTECTIC AL-SI ALLOYS

119. FARMER FRIENDLY PESTICIDE SPRAYER

120. COMPPUTER CUM REMOTE CONTROLLED MULTIPURPOSE ROBOT FOR DEFENCE/INDUSTRIES INV-R06

121. SOLID MODELLING, ANALYSIS, FABRICATION AND TESTING OF SPOOL VALVE FOR ELECTRO HYDRAULIC SERVO VALVE SYSTEM

122. ANALYSIS OF TECHNOLOGY GAP IN MANUFACTURING INDUSTRIES

123. DECISION SUPPORT SYSTEM FOR ENERGY SAVING ANALYSIS IN INDUSTRIES

124. ENERGY INFORMATION SYSTEM FOR TEXTILE INDUSTRIES

125. BENCHMARKING IN SUPPLY CHAIN MANAGEMENT

126. MULTIPURPOSE GRINDER FOR MASS PRODUCTION

127. DESIGN AND FABRICATION OF AUTOMATIC TOLL GATE SYSTEM

128. DESIGN AND FABRICATIONS OF PEDAL OPERATED DROP FORGE HAMMER

129. DESIGN OF SUPPLY CHAIN MANAGEMENT FOR SMALL SCALE INDUSTRIES

130. COST EFFECTIVE SOLAR MICRON SPRAYER

131. DESIGN AND FABRICATION OF TRACTOR DRIVEN VIBRATORY ROLLER FOR POT HOLE REPAIR

132. HORTICULTURE MANAGEMENT USING TAGUCHI TECHNIQUE AND OPERATION RESEARCH

133. IN-PROCESS DOCUMENT MANAGEMENT SYSTEM USING WEB-BASED ENVIRONMENT FOR E-ADMINISTRATION

134. ERGONOMICS CONSIDERATION IN DESIGN AND DEVELOPMENT OF FARM SPRAYER

135. ANALYSIS OF CORROSION WEAR RATE ON FERROUS AND NON-FERROUS METALS USING CORROSION-EROSION WEAR TESTING MACHINE

136. DESIGN AND FABRICATION OF MICRO ABRASIVE JET FOR MACHINING BRITTLE MATERIALS

137.    HYBRID TWO-WHEELER

138. DESIGN AND FABRICATION OF FLAT ROLLING MILLS

139. HYBRID MACHINING: A NOVEL APPROACH FOR MACHINING MICROHOLES ON NON-CONDUCTING MATERIALS

140. CONTINUOUS CEREAL ROLLER FLAKER

141. HANDICAPS WHEEL CHAIR CONTROLLED BY HEAD MOVEMENT

142. MECHANICAL BASED ANTI-LOCK BRAKING SYSTEM FOR 3.2 CC R/C CAR

143. A NOVEL APPROACH FOR PRODUCING MICRO HOLES ON SODA LIME GLASS PLATE USING ABRASIVE HOT AIR JET MACHINING

144. ANALYSIS OF WEAR PROPERTIES OF HARD FACED AGRICULTURAL EQUIPMENT

145. DESIGN AND FABRICATION OF ABRASIVE HOT AIR BLASTING MACHINE FOR ETCHING GLASS AND CERAMIC MATERIALS

146. AUTOMATION OF LAPPING PROCESS

147. RFID BASED AUTOMATIC DETECTOR

148. SIMULATION OF PRESSURE REDUCING VALVE USING BOND GRAPH TECHNIQUE

149. A COST EFFECTIVE DESIGN OF BALL VALVE WITHOUT AFFECTING THE PERFORMANCE THROUGH REDUCTION IN MATERIAL FROM THE STANDARD DESIGNS

150. APPLICATION OF DESIGN OF EXPERIMENTS TO MODEL ELECTRIC DISCHARGE MACHINING PROCESS

information technology engineering projects

• Internet Shopping Cart System
• Software robustness for digital society
• Software as a service
• Software specification and design methodologies
• Software development and deployment
• Programming languages and supporting tools
• Patterns/Anti-patterns/Artifacts/Frameworks
• Agile/Generic/Agent-oriented programming
• Neuronal networks/Fuzzy logic/Temporal logic/ Genetic Algorithms
• Reasoning models/Model checking/Modular reasoning/
• Program verification/validation/correctness
• Embedded and real-time systems
• Consumer-oriented digital economics
• Online consumer decision support & advertising
• Semiotic engineering of online services
• Human factors in computer systems
• Personal information management
• Consumer trust in digital society
• Interaction in smart environments
• Mobile consumers and interactive spaces
• Hedonic and perceived digital quality
• Usability, aesthetics, and accessibility
• Multimodal and interactive interfaces
• Intelligent user interfaces
• Government services in the context of digital society
• ICT support for collaboration
• EKNOW: Information and knowledge management
• Knowledge data systems
• Linguistic knowledge representation
• Knowledge acquisition, processing, and management
• Cognitive science and knowledge agent-based systems
• Knowledge modeling and virtualization
• Context-aware and self-management systems
• Imprecision/Uncertainty/Incompleteness in databases
• Geographic and spatial data infrastructures
• Information technologies
• Optimization and information technology
• Business process integration and management
• Information management systems
• Information ethics and legal evaluations
• On-demand business transformation
• Informational mining/retrieval/classification
• Multi-criteria decision theory
• Organizational information systems
• e-Business, e-Science systems
• Decision support systems
• Zero-knowledge systems
• Expert systems
• Tutoring systems
• Digital libraries
• Databases and mobility in databases
• Industrial systems
• TELEMED: Telemedicine and eHealth
• Telemedicine software and devices
• Virtual telemedicine
• Wireless telemedicine
• Electronic imagery and visualization frameworks
• Color imaging and multidimensional projections
• IP-based networking and applications
• Best effort and QoS
• e-Learning and mobile learning
• Service-oriented platforms
• Peer-to-Peer Systems and applications
• Web-advertising and Web-publishing
• Multimedia and Webcasting
• Consumer-oriented devices and services
• Mobile TV and IPTV
• Consumer-oriented e-commerce
• Smart and digital homes
• Wearable devices
• Smart consumer appliances
• Speech enable appliances
• Consumer accessibility appliances and services
• Economics of security and protection
• Knowledge for global defense
• Security in network, systems, and applications
• Trust, privacy, and safeness
• Business continuity and availability
• Cryptography and algorithms encryption
• Rapid Internet attacks and network
• Applications and network vulnerabilities
• System advanced paradigms
• Data-centered information systems
• User-centric information systems
• Pervasive and ubiquitous systems
• Mobile learning and communications
• Open and distance education systems
• Management and control
• Digital telecommunications management
• Control and monitoring systems
• Measurement and management systems
• Human/Machine interface and man-in-the-loop control
• Energy and power systems control
• Self-monitoring, self-diagnosing, self-management systems
• Digital analysis and processing
• Digital information processing (Voice/Data/Video)
• Computer graphics and animation
• Virtual reality/3D graphics/Games
• Computer modeling/simulation
• Graphic/Image/Photo/Hand-writing analysis and processing
• Pattern recognition / Computer vision
• Natural language processing / robust processing
• Speech recognition and processing
• Mobile devices and biotechnologies
• Robotics/Mobile devices/ Mobile networks
• Handled and wearable computing and devices 
•